Mortars
Ensure the longevity of your flooring
High-Performance Technical Mortars
We tailor our services to your project
Shipping throughout Spain
You can contact us to request delivery anywhere in Spain, or visit us at or any of our locations throughout the country.
Technical Team
We have a technical team that will provide you with the best solutions tailored to your project. You can easily contact our technicians at any time.
Here's the product
Come visit any of our locations, and we'll show you why our product is the one you're looking for at .
Technical Mortars for Industrial Solutions
Contact us or visit any of our stores
Hardening Agents and Additives for Industrial Flooring
Technical Mortars for Industrial Solutions
Advantages of Mortar as an Industrial Flooring Material
– Superior mechanical and abrasion resistance: Pavicret’s hydrated-layer mortars form a monolithic wearing course that increases compressive strength to over 30 MPa and reinforces the surface against continuous wheel wear and impact.
– Dust-resistant, seamless flooring: By being installed “wet-on-wet” with the slab, it eliminates tile joints where dirt accumulates and prevents the dust buildup typical of conventional polished concrete.
– Quick return to normal operations: The floor can be walked on after 24 hours and can withstand forklift traffic in 3–4 days, minimizing production downtime.
– Chemical resistance: The quartz-cement matrix, sealed with methacrylate resins, is resistant to oils, glycols, and de-icing salts—a key feature in workshops, logistics hubs, and loading docks.
| Product | Key Benefits | Applications |
|---|---|---|
| PaviCret Industrial Hydrated Coating Plus | 8–15 mm pumpable coating, corundum aggregate, colors: gray/green/red; maximum abrasion resistance. | High-traffic logistics facilities, hangars, loading docks, and open-air parking lots. |
| PaviCret Industrial Hydrated Coating | “Fresh-on-fresh” quartz-cement mortar; coverage 18–22 kg/m². | Supermarkets, distribution centers, general production floors. |
| PaviCret ACG Hardener | A silica-quartz-cement dusting that reinforces the top 3–4 mm without adding thickness. | Large interior slabs, garage ramps, and economical colored pavements. |
Would you like to learn more about our stamped concrete?
Advantages of PaviCret Industrial Flooring
- Durability without breaking the bank – Matches or exceeds the wear resistance of premium resin coatings, but at a cost that’s up to 40% lower.
- Fast traffic flow – Within 24 hours, you can open pedestrian walkways, and in less than a week, you can move wheelbarrows; resins and polished concrete extend the downtime.
- Seamless continuity —No gaps or joints —Prevents breakage and soot buildup in tile and PVC joints, reducing cleaning time and the risk of accidents.
- Easy renovation – A simple surface milling and a new sealing coat restore the original appearance, whereas with epoxy or PVC, complete removal is usually required.
- Finish versatility – Integrated color, smooth or striped texture, and the option of corundum aggregate for high-impact areas or ramps.
If your goal is to combine heavy-duty performance, quick installation, low maintenance, and a low initial investment, Pavicret technical mortars are the solution that best balances all the key parameters of industrial flooring.
Key Benefits and Recommended Uses for Each Product
| Product | Key Benefits | Applications |
|---|---|---|
| PaviCret Industrial Hydrated Coating Plus | 8–15 mm pumpable coating, corundum aggregate, colors: gray/green/red; maximum abrasion resistance. | High-traffic logistics facilities, hangars, loading docks, and open-air parking lots. |
| PaviCret Industrial Hydrated Coating | “Fresh-on-fresh” quartz-cement mortar; coverage 18–22 kg/m². | Supermarkets, distribution centers, general production floors. |
| PaviCret ACG Hardener | A silica-quartz-cement dusting that reinforces the top 3–4 mm without adding thickness. | Large interior slabs, garage ramps, and economical colored pavements. |
The Best Accessories for Our Industrial Flooring
Sealers and protectants seal the pores, enhance color, and extend the life of the floor; they prevent premature water evaporation, make cleaning easier, and strengthen the chemical barrier against oils and solvents.
| Add-on | Main Function | When to Use It |
|---|---|---|
| Metacret | Penetrating methacrylate resin protector for outdoor use; water-repellent and stain-resistant. | Exposed ramps, logistics yards, areas subject to fuel splashes. |
| SellaCril TOP | A high-gloss, high-hardness curing lacquer; it seals, enhances color, and allows for quick traffic. | Initial sealing of hydrated layers and colored troweled finishes. |
| PaviCril Plus PTR | UV-curing acrylic resin free of aromatic solvents; hygienic satin finish. | Food storage facilities, floors where low odor is required during installation. |
| PaviSeal DF / PaviSeal Pro | Matte-finish curing lacquers for screeds; they control evaporation and reduce cracking. | Large, newly poured industrial slabs or refinished surfaces using a floor polisher. |
| PoliSol | Water-based sealant that’s easy to maintain; ideal for poorly ventilated indoor spaces. | — |
Do you need a consumption estimate or a color selection?
Our technical team designs the most cost-effective system for your service load.
Certified by Bureau Veritas
Committed to quality. At Pavicret, we are certified to ISO 9001certification, awarded by Bureau Veritas, ensuring that all our processes meet the highest standards of quality management. This international recognition underscores our commitment to continuous improvement, efficiency, and, above all, customer satisfaction.
FAQs - Frequently Asked Questions About Pavicret Stamped Concrete
What is the lifespan of these floors?
When properly sealed, they last more than 20 years without requiring major maintenance.
Can they be dyed?
Yes, the industrial line includes 12 standard colors and custom designs for corporate branding.
How can I prevent cracks?
Add Refordur fibers and cut joints to ≤ 35 m² per panel.
Do I need to shut down the entire plant to install it?
No, if the concrete is poured in phases, each section can accommodate light traffic the next day.
Turn your productive square meters into a floor that works just as hard as your business.