Exposed concrete
Keep the paving stone visible
The pavement of the most iconic places
Special complements
Shipping throughout Spain
You can contact us to request delivery anywhere in Spain, or visit us at or any of our locations throughout the country.
Technical Team
We have a technical team that will provide you with the best solutions tailored to your project. You can easily contact our technicians at any time.
Here's the product
Come visit any of our locations, and we'll show you why our product is the one you're looking for at .
Discover our deactivated printed concrete system
Contact us or visit any of our stores
Comparison with other exterior pavements
Before making your choice, check how the most common options perform against Pavicret’s deactivated concrete.
| Criterion | Exposed concrete | Polished concrete | Precast pavers | Exterior ceramic tile | Asphalt |
|---|---|---|---|---|---|
| Slip-resistant | Class 3 wet stable cementval.com | Class 1-2; polishes with use wessexlab.com | Good at first; may lose grip due to sand in joints hormipavimento.es | Variable (depends on the enamel) | Bass in rain |
| Maintenance | Low: occasional washing and sealing | High: polishing and periodic resins | Medium-high: joint cleaning | High: joints and broken parts | Medium: frequent patching |
| Customization | Infinite granulometries and colors | Limited to superficial dyes | Standard formats | Wide range, but single parts | Monotonous finish |
| Shelf life | 25+ years | 15-20 years | 15 years | 10-15 years | 5-10 years |
| Installed Cost* | 25-40 €/m² | 30–50 €/m² | 35-60 €/m² | ≥ 40 €/m² | 25-50 €/m² |
Do you want to know more about our deactivated pavement?
Discover our deactivated printed concrete system
Main advantages of deactivated concrete
- Non-slip as standard: The controlled roughness achieves slipperiness coefficients above 45 Rd, ideal for swimming pools, ramps and pedestrian walkways.
- Customizable aesthetics: Choose local aggregates – pebbles, granite, crushed marble – or pigment the matrix with Cromicret for unique combinations that blend in with any environment.
- Extreme durability: Exceeds 25 years of useful life thanks to its thickness (≥10 cm) and intrinsic protection against wear and UV rays.
- Minimal maintenance: Pressurized water and, every 3-4 years, seal with acrylic resin to restore gloss and water repellency is sufficient.
- Fast and continuous work: In a single day, the concrete is poured, DesactivaCret is sprayed, washed and the joint is cut. Less labor than laying pavers or tiles.
Key Benefits and Recommended Uses for Each Product
| Product | Key advantage | Recommended Uses |
|---|---|---|
| Cromicret | Colored mortar that surrounds the aggregate and enhances the contrast; resistance ≥ 30 MPa. | Urban sidewalks, squares, private terraces. |
| DesactivaCret | Aqueous phase deactivator that retards ≤ 3 mm of concrete skin to expose the aggregate without damaging it. | Projects where homogeneous and safe exposed aggregate is required. |
| Refordur Fiberglass | Controls shrinkage and reduces cracks, replacing light mesh. | Large slabs (parking, industrial accesses). |
| PaviLat Text | Bonding bridge on old concrete or surfaces with little porosity before redoing the pavement. | On surfaces with little porosity |
Certified by Bureau Veritas
Committed to quality. At Pavicret, we are certified to ISO 9001certification, awarded by Bureau Veritas, ensuring that all our processes meet the highest standards of quality management. This international recognition underscores our commitment to continuous improvement, efficiency, and, above all, customer satisfaction.
FAQs - Frequently Asked Questions on Deactivated Concrete
How to apply deactivated concrete
The slab is poured, leveled and, when the water film disappears, DesactivaCret is sprayed. After 6-12 h, the surface layer is removed with pressurized water, leaving the aggregate visible, and finally sealed.
How long does it take to be usable?
It can be carefully walked on at 24 h; light traffic is viable at 72 h and full strength is reached at 28 days.
What is the average price per square meter?
Including labor and initial sealing, it ranges from 25 € to 40 €/m² depending on the aggregate and colors chosen.
What maintenance is required?
Only occasional washing and reapply sealer every 3-4 years to revive color and improve stain resistance.
Is it suitable for ramps or pool areas?
Yes, its Class 3 certified rough texture guarantees safety even on wet surfaces.
Can I combine different aggregates in the same slab?
Of course; you can delimit areas with PVC strips or cut joints and pour different mixtures to create geometric designs.
What minimum thickness do I need?
We recommend at least 10 cm for pedestrian use and 15 cm if it will support vehicular traffic.
Can it be placed over existing concrete?
Yes, using PaviLat Text as a bonding bridge and pouring a new layer of 5-8 cm with Refordur fibers.